Tips to paint the House itself according to our wishes without Plumbers

Do you feel the atmosphere of your home boring? You want to change this by changing the color of the wall paint? Do you feel a bit complicated with the painter? Do you want a little exercise and expression in full color with the house? No need to use the services of a painter, you can do it yourself for savings.

If you need to involve your family when off when you are painting the house. We wanted to share some tips and ways to paint your own home without the cobbler. Although we are a contracting company that also provide for the needs of your house paints for exterior and interior also provides painting services, is the one we will share some tips on how to paint the walls of the house.

painting-outside

6 How to Paint Your Own Home Without Painters

Of course we hope that these tips on how painting can help you to change the paint color of your home so that it becomes more personalized art and comfort as well as more able to bring a new atmosphere fresh.

1. Clean Walls

Make sure the surface you paint the wall will ulagn clean of dust. Clean dust and dirt on the wall area. Dirt on the walls of this very obliged eliminated. Dust, dirt and oil stains will make the final result is not smooth and evenly paint. Berishkan with water mixed with a detergent formula is soft and spongy cellulose. Rub the sponge to the walls to clean, then rinse with water to remove soap residue.

2. Protect the part Tak Ingin painted with Duct Tape

A barrier between walls and floors, the windows and the window frame normally should be covered so that is not exposed to the paint stains. Protect part of the house do not want painted with masking tape or adhesive tape when painting. Once completed, immediately unplug the tape before the paint dries so that the paint does not participate uprooted.

3. Close Cracks in Walls

Use plamir (wall putty) to close gaps or cracks in the walls, and blend until smooth using sandpaper. Apply a paint primer also, a kind of liquid that is applied before painting in order to get the end result is flat and shiny.

4. Use Small Brush on the part Narrow

Painter tool in the form of roller can not be applied in all parts of the wall, just over a large area alone. While for the most inaccessible areas such as the corner of the room, use a small brush width of two inches.

5. Use Mechanical Movement ZigZag

Tricks with flat paint is by making movements zig-zag up and down repeatedly until the walls closed flat. After 2-3 hours back with a new coat of paint to make it more seamless result. Roller can be used to flatten the surface color of the walls ..

6. Repeat Again If Need

When the painting is still less than perfect results, repeat the process again and make sure that both have worked well. When splashes of paint fell to the floor, wipe it off with a wet cloth.

About the author

Isabella Beatrice

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *